Where E262-3046 sits in the Hyundai 29-tonne range
This is the point that the Hyundai 29-tonne class shares with the Doosan S280 family, and it is the reason three part numbers keep turning up in the same email. Wear-parts catalogue rows print E262-3046 at 7.60 kg against an R290/320/235 fit column; a North American Hyundai chart prints the same casting as 262-3046 at 16.8 lb (7.62 kg) for the R250LC-7A, R290LC-7 and 320NLC-7A; and foundry pages print E262-3046 = 2713-9038 = 61N8-31310 on one line, at 6.4 kg. Doosan-side lists carry the same point as 2713-6043, alias 2713-9038, at 16.53 lb (7.50 kg) for the DH280 and DH320.
That 6.4 kg against 7.62 kg is not a mistake in any single catalogue. It is what happens when a standard point, a rock chisel, a tiger and a heavy grade all trade under one base number. We quote E262-3046 by weight and profile, so the casting that arrives is the one your bucket has been running.
Fitment table
| Machine / row | Tooth | Pin | Retainer | Adapter |
|---|---|---|---|---|
| Hyundai R290 / R320 / R235 | E262-3046 — 7.60 kg | E262-5004 — 0.26 kg | 61E5-11150 | E262-3027 — 40 mm |
| Hyundai R250LC-7A / R290LC-7 / 320NLC-7A | 262-3046 — 16.8 lb (7.62 kg) | E262-5004 | 61E5-11150 | E262-3027 — 1.57 in (40 mm) 30° bevel, 28.0 lb |
| Adapter fit rows R305 / R300 / XD290 / XD320 / R360 / R320 | E262-3046 | E262-5004 / P235 | 61E5-11150 | E262-3027 — 40 mm, 13.2 kg |
| Doosan DH280 / DH320 / SOLAR 330-III (same casting) | 2713-6043 / 2713-9038 — 16.53 lb | P235 (SB-P235) | 3G9549 printed on that row | 2713-9037 |
| Hyundai R305LVS / R350LVS (heavier family — not this tooth) | 61NA-31310 — 12.90 kg | Family hardware | Family hardware | 61NA-31320 — 18.60 kg |
Two warnings are built into that table. First, R305 appears on both sides: the E262-3027 adapter is filed under the R305 by some suppliers, while the R305LVS wheel-machine fit rows carry the heavier 61NA family, whose point is a 12.90 kg casting. Second, the 61NA adapter is published at 42 mm by one list and 1.38 in (35 mm) by another, so the opening is measured, never assumed.
Choosing the profile
Run the standard point in sand, gravel and general digging. Take the E262-3046RC rock chisel into rock and quarry work, and expect the quoted weight to move: the same RC number is published at 6.40 kg and at 9.40 kg in a single wear-parts list, and at 20.9 lb (9.48 kg) in a North American chart. Whatever the catalogue says, a rock chisel is heavier than the standard point on the same scale — if it is not, it is not the HD grade. The E262-3046T tiger long at 19.6 lb (8.89 kg) and the E262-3046WT twin tiger at 20.7 lb (9.39 kg) are the penetration profiles for compacted material and wet clay. For the heaviest rock bucket work, the 61N8-31310GG heavy rock point is published at 10.5 kg.
Buying notes
We do not publish prices on this page, because a tooth box is quoted as tooth plus pin plus retainer plus adapter, and the freight lane moves the number more than the casting does. Send the machine model with its serial prefix, the tooth number or a photo of the old point in the bucket, the pin measured with a caliper — shank then length — and the adapter opening in millimetres. A firm quote comes back the same working day, FOB Shanghai or CIF to your port.
FAQ
Q: Which Hyundai machines take the E262-3046 bucket tooth?
A: Catalogue fit rows list it for the R290, R320 and R235, and a North American Hyundai chart prints the same casting for the R250LC-7A, R290LC-7 and 320NLC-7A. Foundry rows add the R210, R290, RC250 and the R305/R300/XD290/XD320/R360/R320 adapter group.
Q: What pin and retainer does the E262-3046 tooth use?
A: Pin E262-5004 at 0.26 kg and retainer 61E5-11150 at 0.05 kg. The pin is printed as P235 in the Doosan lists, and one foundry family table writes the pin column as E262-5004/P235.
Q: Which adapter fits the E262-3046 tooth?
A: E262-3027 — 40 mm bevel at 13.20 kg or 50 mm bevel at 12.80 kg. The 61N8-31320 vertical adapter also fits this class at 40 mm (13.8 kg), but one chart prints the same number at 1.38 in / 35 mm and 11.02 kg, so measure the nose.
Q: Is E262-3046 the same tooth as Doosan 2713-9038?
A: Foundries sell one casting under E262-3046, 61N8-31310 and 2713-9038. The weights agree where the profiles match — 7.62 kg against 7.50 kg — and the wider spread across catalogues comes from the rock chisel, tiger and heavy grades sold under the same base number.