Where the 2713-1217 Tooth Fits
The 2713-1217 is the DH220-5 tooth, and the DH220-5 is the 21.5-tonne class Doosan kept building under new names. Doosan's DX225LCA brochure says it directly — the machine "has all the advantages of the previous model, the Solar 225LC" — and the ground engaging tools came across with it, which is why one tooth number appears against so many machine names.
| Machine family | Tooth | Pin | Lock | Weld-on adapter |
|---|---|---|---|---|
| Doosan DH220 / DH220-5 | 2713-1217 (or older 2713-9041) | 2705-1020 | 2114-9008 | 2713-1218 (35 / 40 mm); older 2713-9042 |
| Solar 220LC-V / 225LC-V, S220-5, S225-5, S200W-5 | 2713-1217 | 2705-1020 | 2114-9008 | 2713-1218; 3T1218 (35 mm) |
| DX210W, DX225, DX225LC, DX225LCA | 2713-1217 | 2705-1020 | 2114-9008 | 2713-1218 (35 / 40 mm) |
| Doosan DH280 / DH300 / S290-5 class (for contrast) | 2713-1219 (also 230111-00090 / 713-00054) | 2705-9010 — 22 mm × 109 mm | 2114-1849 | 2713-1220 (40 / 50 mm) |
The last row is the one that mixes up orders. Some catalogue pages list the heavier DH300-class tooth against the DX225LCA as well, and the two systems are not interchangeable in either direction: a 22 mm pin does not enter a tooth pocket bored for 20 mm. If you are unsure which family your bucket carries, pull one pin and caliper it — 19-20 mm is this tooth, 22 mm is the DH300 tooth. The full DX225 tooth guide walks through the measurements.
Profiles: Standard, RC and TL
| Profile | Part number | Catalogue weight | Where it earns its keep |
|---|---|---|---|
| Standard point | 2713-1217 | about 5.1 kg (sand cast) | Soil, sand, gravel and mixed fill — the general purpose tooth |
| Rock chisel | 2713-1217RC | 4.5-7.2 kg depending on variant (RC-2, RC-3, RC-4, RCX) | Broken rock, concrete and hard trenching where penetration matters more than tip width |
| Tiger long | 2713-1217TL | 6.3-6.5 kg | Long, narrow profile for penetration; corners wear fastest, so TL usually lands on the outer positions |
All three share pin 2705-1020 and lock 2114-9008, so a mixed box needs one pin number and one lock number. That is the practical reason we quote teeth, pins and locks as a single line rather than three separate items — the freight and the customs paperwork stay the same and nothing arrives missing.
Ordering Notes
- Send the pin measurement. Diameter and length off one old pin settles the family faster than any part number, and it catches buckets that were rebuilt with a different shank.
- Weights are freight figures. Cast weight moves by a kilo between catalogues because suppliers weigh bare castings or packed parts. Pin diameter, pocket and adapter nose decide fitment — not the weight.
- Aftermarket, stated plainly. We supply aftermarket teeth cross-referenced to the Doosan numbers, not genuine Doosan parts. We do not quote wear life in hours: your ground, your operator and your bucket decide that.
- No published prices. The quote depends on profile mix, cast grade, the number of pins and locks in the box and the shipping lane. Ask and you get a firm figure, FOB Shanghai or CIF.
FAQ
Q: Which Doosan models take the 2713-1217 tooth?
A: DH220 and DH220-5, Solar 220LC-V / 225LC-V, S200W-5, S220-5, S225-5, DX210W, DX225, DX225LC and DX225LCA appear on 2713-1217 fitment rows. It is the DH220-5 tooth on the 21.5-tonne class, and the same part is used on the Doosan DX225-7 series buckets listed with an S220-5 shank.
Q: What pin and lock comes with the 2713-1217 tooth?
A: Pin 2705-1020 (also written 2705-9012) and lock 2114-9008 (also written 2114-1848). The pin is quoted at 19-20 mm diameter and 105 mm long at roughly 0.26-0.30 kg. Standard, RC and TL profiles all use the same pin, so one pin number covers a mixed box of teeth.
Q: What is the weight of the 2713-1217 tooth?
A: Catalogue weights run about 5.1 kg for the standard sand-cast tooth, 4.5-7.2 kg across the rock chisel variants and 6.3-6.5 kg for the tiger long profile. Cast weight varies with pattern and pour and with whether a supplier weighs bare castings or packed parts, so treat it as a freight figure rather than a fitment specification.