The Volvo EC210 is one of the most common 20-tonne class excavators still working in West Africa, the Gulf and Latin America, so its ground engaging tools are a steady export line — and a steady source of returns. The tooth is easy; the name is not. Owners of the machine, owners of a 24-tonne EC240 that shares the family, and buyers holding a catalogue page that prints a Caterpillar pin beside a Volvo tooth all search the same phrase and come back with three different parts lists.
The numbers that matter
Both systems quoted for this machine are set out side by side below. Read the weight column first — it separates them faster than the part numbers do.
| Aftermarket / current catalogue answer | Volvo parts reference guide answer | |
|---|---|---|
| Tooth | 14530544 (also written 1453-0544, 1171-01371) | 20GPE / VOE 1542685 general purpose; 20MRE 1542675, 20PPE 1542793, 20TPE 15431283, 20NSE 15431281 in the same row |
| Tooth weight | 6.6 kg foundry figure, 6.9 kg distributor figure, 6.2–7.2 kg quoted range | 4.5 kg for 20GPE; 4.0 kg for MRE and PPE; 5.4 kg TPE; 5.8 kg NSE |
| Weld-on adapter | 1171-01620, 40 mm lip opening | AE02BL40 / VOE 1542961, long bottom leg, 10.4 kg |
| Pin | 14540726 (1454-0726), about 0.26 kg | Locking device 20PX / VOE 11417146, 0.1 kg |
| Retainer | 14537622 (1453-7622) | 15J20R / VOE 11417161 standard, 15J20MR / VOE 11716119 heavy duty; fitting tool 15J30T / VOE 11417168 |
| Heavier option in the same guide | RC rock chisel and TL tiger long versions of 14530544 | 30-series row for the same class: 30GPE 15423552 at 6.7 kg, 30MRE 15423946, 30PPE 15426144, 30PTE 15426387, 30NSE 15420414, on adapter AE02BL40 VOE 1542962 at 12.5 kg, lock 30PX 11417147 |
That last row is the story: one machine name, three castings — 4.5 kg, 6.7 kg, and the 6.6–6.9 kg aftermarket 210 point.
What Volvo's own parts guide prints for the EC210
Volvo's published parts reference carries two rows for the EC and EW210 class on the same adapter family. The lighter row pairs adapter AE02BL40, VOE 1542961, at 10.4 kg with the 20-series points, locked by the 20PX device, VOE 11417146, on a 15J20R retainer and driven with the 15J30T tool. The heavier row uses adapter VOE 1542962 at 12.5 kg with the 30-series points on the 30PX lock and 30J40R retainers. Volvo's handbook covers the same 20P, 21P and 30P designations but never reconciles them with the 14- and 11-prefix numbers the aftermarket ships — different numbering generations of one system. Buy on a Volvo parts number and you are buying the small casting; replace what came off the machine and it is almost certainly the larger one.
The 210 family the aftermarket actually ships
14530544 is the number Chinese foundries and wear-parts distributors print for the 210 point. It appears as 1453-0544 with the dash, as an eight-digit block without it, and cross-referenced to 1171-01371 or 117101371 on interchange lines. Profiles follow the usual pattern:
| Profile | Numbers printed | Quoted weight |
|---|---|---|
| Standard / general purpose | 14530544, 1453-0544, 1171-01371 | 6.6 kg, 6.9 kg, 6.2–7.2 kg depending on source |
| Rock chisel (RC) | 14530544RC, 1171-00371RC, RVF210RC, LFV210RC | 7.3–10.8 kg across listings |
| Tiger long (TL) | 14530544TL | Listed alongside the standard tooth in distributor tool lists |
Fitment rows read EC210, EC210C, EC210D, EC200D, EC220D, EC240, EC290B and EW205D — plus Samsung MX225 and LX373 on older lines, which left the same factory on the same noses.
Adapter, pin and lock: 1171-01620 and the 40 mm opening
The aftermarket pairs 14530544 with 1171-01620, a weld-on shank with a 40 mm lip opening. Check the bucket before welding: wear-parts lists also carry a vertical 40 mm adapter under 14530543 and 14400986 at 11.30 kg, and a bevel under 14732592 at 11.70 kg. Same opening, different nose — the tooth does not care which one it sits on, as long as the pocket and pin line up.
Hardware is pin 14540726 with retainer 14537622. Side cutters come as a pair, 14652623 left and 14652622 right at 12.70 kg each, and lip protector 14528355 is quoted at 2.10 kg for a 40 mm edge. Order them with the teeth if the bucket is being re-edged in the same workshop — the freight is paid either way.
Where the two systems collide
Three collisions to know before you buy:
- "Volvo 210" is not "EC210". 210 is the tooth family; EC210 is one machine in it. The family also covers the 24-tonne EC240 and the EC290B, so a supplier quoting "Volvo 210 teeth" may be shipping for a heavier bucket than yours.
- Caterpillar numbers in Volvo rows. Several supplier pages print 8E6358 and 8E6359 — the pin and sleeved retainer for the Cat J350 tooth — as the hardware for a Volvo 210 tooth. A 210 tooth does not take a J350 pin; where the row shows an 8E number, the catalogue author copied the wrong column.
- Weight drift inside one number. 6.6 kg against 6.9 kg for "14530544" is a normal 4% spread between bare castings and packed parts. A 4.5 kg tooth sold as an EC210 tooth is not drift — it is the 20-series casting.
What the machine itself weighs in at
This matters because the bucket class decides the tooth. Volvo's published figures put the EC210 at 20.7–21.3 tonnes on a 1.1 m³ general purpose bucket with six teeth; the Stage V EC210 sold in North America is quoted at 20.5 to 24 tonnes. The heavier build runs the heavier bucket — and the 210 family tooth.
How to order a Volvo 210 tooth without a return
Four things settle it: the machine model with its serial prefix; the tooth number or a side-on photo of the old tooth in the bucket; the pin measured with a caliper, shank then length; and the tooth weight on a scale. Send those four and the quote is firm — tooth, pin, retainer, adapter and cutters on one line, FOB Shanghai or CIF your port.
FAQ
Q: What bucket teeth does a Volvo EC210 take?
A: The catalogue answer is 14530544 of the 210 family, 6.6–7.2 kg, on the 40 mm adapter 1171-01620 with pin 14540726 and retainer 14537622. Volvo's own reference lists 20GPE, VOE 1542685, at 4.5 kg for the same class. Measure the pin and pocket to see which casting you have.
Q: Is the "Volvo 210" tooth the same as the EC210 tooth?
A: No — 210 is a tooth family, EC210 a machine. The family serves the 20-to-30-tonne Volvo group: EC210, EC240, EC290B, EW205D, EC200D.
Q: Why is 8E6358 printed on some Volvo 210 tooth listings?
A: Because 8E6358 is a Caterpillar number — the Cat J350 pin, 8E6359 its retainer — and the catalogue mixed two systems. Volvo 210 hardware is 14540726 with 14537622.
Q: Does the 14530544 tooth fit the EC240 as well?
A: Fitment rows list it for the EC210, EC210C, EC210D, EC240, EC290B and EW205D; distributor lists add the EC200D and EC220D. Confirm the adapter opening and pin on a heavier machine.