Where the 2713-0032 Tooth Fits
The 2713-0032 is the 36-tonne Doosan tooth — the class that ran as the S330 and the DH360, sold on as the DH370, and carried into the DX380 buckets still working in mining and quarry fleets. Distributor rows put the number against DH360-5; one China foundry catalogue prints the same casting as 713-00032 with family code S330 and the machines DH370 and DH360; supplier pages widen the line to the Solar 340 and DX340.
| Machine family | Tooth | Pin | Lock | Weld-on adapter |
|---|---|---|---|---|
| Doosan DH360 / DH360-5 / DH370 | 2713-0032 / 2713-1234 / 713-00032 | 2705-1021 or 705-00006 (both published) | 2114-1849 or 114-00246 | 2713-0033 in 40 / 50 / 55 / 60 mm |
| Doosan S330, S360-5, S370, S370-5 | 2713-0032 family | Per the bucket's existing hardware | Per the bucket's existing hardware | 2713-0033 — the 50 mm row lists S370, S370-5 and S360-5 |
| Doosan DX380 (50 mm adapter row) | 2713-0032 family | Per the bucket's existing hardware | Per the bucket's existing hardware | 2713-0033 in 50 mm |
| Solar 340 / DX340 (supplier fitment lines) | 2713-0032 family | 705-00006 is listed as the DH360 / DX340 pin | 114-00246 | 2713-0033 |
| Older DH360 series buckets | 2713-9044 / 2713-6053 | Older pin set | Older retainer set | Check the casting number on the nose before ordering |
| Doosan DH280 / DH300 / S290-5 (for contrast) | 2713-1219 | 2705-9010 — the smaller pin | 2114-1849 | 2713-1220 in 40 / 50 mm |
Put the last two rows side by side and the reason for most wrong orders is visible. The 30-tonne tooth and the 36-tonne tooth share the 2114-1849 lock number but not the pin, and the 3-tonne gap between the machines is about 1 mm at the pin. The full DH360 / DX380 guide sets out both hardware sets, the pin figures that disagree between catalogues, and the adapter openings in detail.
Profiles: Standard, RC, TL and the Rock Variants
| Profile | Part number | Catalogue weight | Where it earns its keep |
|---|---|---|---|
| Standard point | 2713-0032 / 713-00032 | 9.2 kg to 10.50 kg depending on catalogue | Soil, sand, gravel and mixed fill on 36-tonne carriers — the general purpose tooth |
| Rock chisel | 2713-0032RC | 10.20 kg | Broken rock, concrete and hard trenching where penetration matters more than tip width |
| Heavy rock | 2713-0032RC-1 | 12.00 kg | Quarry and mining faces where the standard RC is being consumed too fast |
| Tiger long | 2713-1234TL / 2713-0032TL | 8.70 kg (9.00 kg TL-YZ) | Long, narrow profile for penetration; usually fitted to the outer positions where wear concentrates |
| Rock variants | 713-00032RCD / RCX / RCK | 10.20 / 10.30 / 10.20 kg | RCD, RCX and RCK chisel geometries; the RCX is also listed as 23011-0163 |
| Older DH360 nose | 2713-9044 / 2713-6053 | Foundry catalogue lists it for DH360P / DH360R / DH360 and DH420 | Buckets still running the original nose — check the casting before ordering this family |
Every profile shares the same pin and lock as the standard tooth, so a mixed box needs one hardware line rather than one per profile. That is why we quote teeth, pins and locks as a single item: the freight and the customs paperwork stay the same, and nothing arrives missing from the set.
Ordering Notes
- Send the pin measurement. Diameter then length. That is what chooses between the 2705-1021 and 705-00006 hardware sets without arguing catalogues.
- Photo the adapter nose. A rule across the lip opening confirms 40, 50, 55 or 60 mm. A number ending in 9044 means the older DH360 series and a different tooth.
- Weights are freight figures. The 9.2 kg to 10.50 kg spread is casting pattern and packing, not fitment. Pin diameter, pocket and adapter nose decide what fits.
- Aftermarket, stated plainly. We supply aftermarket teeth cross-referenced to Doosan numbers, not genuine Doosan parts. Doosan, Daewoo and Solar are trademarks of their owners, used here to describe fitment only.
- No published prices. The quote depends on profile mix, cast grade, how many pins and locks are in the box and the shipping lane. Ask and you get a firm figure, FOB Shanghai or CIF.
FAQ
Q: Which Doosan models take the 2713-0032 tooth?
A: DH360, DH360-5, DH370, S330 and the S360-5 / S370 / S370-5 class, with Solar 340 and DX340 also appearing on supplier fitment lines, and the DX380 listed against the 50 mm 2713-0033 adapter. Distributor rows label 2713-0032 / 2713-1234 as the DH360-5 tooth, and one China foundry catalogue prints it under family code S330 for the DH370 and DH360.
Q: What pin and lock comes with the 2713-0032 tooth?
A: Two hardware sets are published. Pin 2705-1021 with lock 2114-1849 appears in the BDI Wear Parts Doosan list and on supplier pages headed DH360 713-0032 Standard. Pin 705-00006 with retainer 114-00246 appears in distributor hardware lists as the DH360 / DX340 pin and retainer, and is the matching hardware shown with the rock chisel 2713-0032RC. A third listing offers 8E8409 as a tooth stop for the same tooth, which is Caterpillar's J400 retainer number rather than a Doosan one.
Q: How much does the 2713-0032 tooth weigh?
A: Catalogue weights run 10.50 kg for the standard tooth and 10.20 kg for the rock chisel in the BDI Wear Parts Doosan list, 10.3 kg and 9.2 kg for the same tooth in two other catalogues, 12.00 kg for the heavy rock row 2713-0032RC-1, and 8.70 to 9.00 kg for the tiger long profiles. The spread reflects whether a supplier weighs a bare casting or a packed tooth, so treat the figure as a freight number rather than a fitment specification.
Q: Is the 2713-0032 the same as 713-00032 or 2713-1234?
A: Yes. 2713-0032, 2713-00032, 713-00032 and 2713-1234 are the same Doosan 36-tonne class tooth under different catalogue spellings. 2713Y00032, 713Y00032, K1005018B and 230111-00023 also appear as interchange numbers on supplier pages. The pin, lock and adapter do not change with the spelling — only the number printed on the packing list does.