What This Filter Is, and What Sellers Call It
The same number is described two ways. Western filter catalogues list 14524170 as a low-pressure hydraulic filter, 93 mm outside and 136 mm long, thread 1 1/8-16 UN, gasket 72 × 62 mm. Parts sellers in China and the Russian-speaking market list the identical can as the servo filter. Neither description is wrong — this is a canister on the low-pressure hydraulic side, and the naming depends on which circuit the seller has in mind. What it is not, under any name, is the element that stands inside the hydraulic tank.
The dimensions are what to order on. 93 mm across, 136 mm long, and a thread you can check against the old one with a thread gauge or a caliper across the spigot. Two suppliers quoting the same number and different sizes is a sign one of them has 14509379 in mind, because a 450 mm cartridge cannot be mistaken for this can once both are on a bench.
14524170 Against 14509379
| 14524170 | 14509379 | |
|---|---|---|
| Type | Spin-on canister | Cartridge element |
| Height | 136 mm | 450 mm |
| Outside | 93 mm | 150 mm |
| Fixing | 1 1/8-16 UN thread | 110 mm bore onto a centre tube |
| Location | Filter head, low-pressure side | Inside the hydraulic tank |
| Cross | Donaldson P556005 | Donaldson P551210 |
| Listed for | EC210B, EC210C, EC235C, EC240B, EC290B | EC140B–EC240B, EC290B, EW145B |
One machine can need both, which is why the two numbers sit next to each other in kits and why a mixed order goes wrong. A service that replaces the can and leaves the 450 mm element in the tank has changed the cheap filter and left the one carrying the return flow.
Ordering Notes
- Check the thread, not just the size. A 93 mm can with the wrong thread will start two turns and then leak.
- Confirm the machine generation. B, C and D builds share this can across several models, but not every filter on the machine comes along for the ride.
- Take the gasket with it. 72 × 62 mm; a hardened old gasket is the usual reason a new can weeps at the head.
- Say if a breaker is fitted. 14510898 is a separate element on the hammer circuit and is not covered by this can.
- Aftermarket, stated plainly. Aftermarket filter cross-referenced to Volvo numbers. Volvo is a trademark of its owner, used here to describe fitment only.
- No published prices. Quote depends on quantity, packing and lane — ask and you get a firm figure, FOB Shanghai or CIF.
FAQ
Q: What size is the Volvo 14524170 hydraulic filter?
A: 93 mm outside diameter and 136 mm long, 1 1/8-16 UN thread, gasket 72 mm outside and 62 mm inside. It is a spin-on canister, replaced as a complete unit.
Q: Is 14524170 the return filter for an EC210B?
A: It is a hydraulic filter on the machine, but not the in-tank return element. The return element is 14509379, a 450 mm cartridge with a 110 mm bore. This one is a 136 mm spin-on on the low-pressure side.
Q: Which Volvo machines take the 14524170 filter?
A: Filter catalogues list the EC210B, EC210C, EC235C, EC240B and EC290B. Parts sellers also quote it as 31E9-0126.
Q: Is this a genuine Volvo filter?
A: No — aftermarket filter, cross-referenced for fitment. Ask your Volvo dealer for a genuine part by 14524170 if your service contract requires it.